The first step in conducting a gre test is to gather the appropriate parts. This includes the grease, valve stem, bearing, and camshaft. The parts should be arranged on top of one another with the grease in the back of the engine. Before removing them from the engine, you should ensure that the grease is drained out of the engine and that there is no left over grease.
Next, you need to find the oil pressure gauge. When the oil pressure gauge is not located on the dash or in the glove box, it should be located somewhere close to the engine. The oil pressure gauge is the most important part of the gre machine and it should always be located near the front of the engine.
After locating the oil pressure gauge, you need to remove the oil filter to get access to the grease. When you are removing the oil filter, you should remove any oil cap to allow for easy access to the oil pan. It is important to remember to unplug the engine before removing the cap. Once you are done removing the cap, you can then remove the oil filter assembly and place the cap back on.
Next, you need to locate the pressure gauge and make sure the needle on the pressure gauge is pointing towards the green and if it is, then you are ready to read the test. The gauge should show the proper level of oil pressure. The needle will either point to the left of the needle or the right side.
In order to make sure that all of the parts are completely drained of the oil, you will need to use a funnel to pour the remaining oil into a container. You can then take your time to check and make sure that all parts of the machine are completely dry.
If there are any spots where oil is still sitting on the intake manifold or the valve guides, you can dip your fingernail in the oil, wipe your finger with a damp cloth, and then clean the spot with your finger. If the spot is still dirty, you can use a piece of plastic cleaner and wipe the area with the cleaner.
As you can see, there are several ways to do a gre test and you should not have a problem finding the best way to conduct a test. You can also purchase a free test kit so that you do not have to worry about doing the tests yourself.
If you want to do the test yourself, there are a couple of things that you should know when you are doing your own greatest. Before you begin, make sure that you remove the cap from the oil reservoir, and the oil switch from the valve cover.
With your finger, you should put the oil cap back on the oil reservoir. Next, you will want to turn off the ignition, then you can place the oil switch back where you originally put it. Then you will turn on the engine and check the oil pressure gauge to make sure that the oil level is proper.
To complete the test, you will want to do one of two things. Either you can place the needle to the right of the needle or the left of the needle to show that the oil pressure is correct, or you can simply use a stopwatch. The stopwatch is the easiest way to do a test because it allows you to easily see the speed and timing of the test.
If you want to go this route, you will first have to turn on the ignition and then you should check to see that the engine is at a slow speed while the stopwatch stops the motor at the desired position. You will have to do the test two or three times, depending on the engine size.